What Is The Right Installing Way Of The Hexagonal Body Rivet Nut?

The hexagonal body rivet nut has been divided into flat head half hexagonal body rivet nut and countersunk head half hexagonal body rivet nut,it's composed of an internal threaded sleeve and a thin exterior body.The flat head half hexagonal body rivet nut and countersunk head half hexagonal body rivet nut need to work with a threaded fastener.

Here are correct steps of installing the flat head half hexagonal body rivet nut and countersunk head half hexagonal body rivet nut:

 

1.Tools you need to install the flat head half hexagonal body rivet nut

You need to bring a drill bit,a drill motor,a round file,two adjustable wrenches and other necessary tools.

 

2.Installation process of the countersunk head half hexagonal body rivet nut

(1)Firstly,measure the diameter of the countersunk head half hexagonal body rivet nut.

(2)Secondly,insert a drill bit into the chuck of the drill motor whose diameter is 1/32 inch larger than the countersunk head half hexagonal body rivet nut.

(3)Thirdly,drill a hole in the base and clean the surface.

(4)Fourthly,slide the rivet nut into the drilling hole and secure it tightly.

 

3.Tips and warnings about installing the flat head half hexagonal body rivet nut

You should wear a pair of safety glass to protect your eyes from the metal shavings.