Applications Guide of  Rivet nuts

1. Rivet nuts in S Series using free cutting iron, through heat and surface treatment processes; Rivet nuts in CLS Series using free cutting stainless steel, without surface treatment.

2. The hardness of low-carbon steel plate must be less than 70RB, while the hardness of stainless steel plate must be less than 80RB.

3. Rivet nuts are suitable for a variety of thickness of the plate, the minimum thickness of 0.8mm, they are selected according to the sheet thickness and nut specifications, then determine to use A size of the corresponding tail number Z.

4. The aperture size needs to be accurately controlled within 0- + 0.075mm tolerance size when processing, preferably punching. Generally, nuts should be mounting on "off " side.