How to Use Manual Rivet Nut Tools?

Using the rivet nut tool insert rivet nuts into the mounting holes and fixing them.

(1) tighten the rivet nut onto the riveting tool.

(2) use the riveting tool to put the rivet nut into the drilled mounting holes.

(3) compression nut, pressing wrenches on both sides of rivet nut tools to the middle of the rod, only one time, and therefore the pressure of which look to be in place, prohibit to re-pressing to avoid damaging the fastening thread inside the nut.

(4) riveting tools and rivet nut depart: Just loose the ball head, riveting tools and rivet nut will depart after loosen completely, prohibit riveting tool directly pull out, so as to not destroy the thread inside the nut.