The Commonly Use of Closed End Rivet Nuts

If the nut of a product needs to be installed on product surfaces, while the inside space is too small to let the head of riveting machine enter to make press-riveting, as well as when the budding or other methods can not reach the strength requirements, in this time, pressure riveting and up riveting are not feasible. You have to use riveting. The closed end rivet nuts or blind rivet nuts are applicable to all the thickness of sheet, pipe (0.5MM-6MM) in fastening areas.

Pneumatic or manual rivet gun takes only a single blow to drive the rivet, which is firm and convenient. Pneumatic rivet gun replaces the traditional welding method, to make up the shortcomings of welding fusible for thin tube, difficult welding for nuts or others.

Rivet nuts such as closed end rivet nuts or blind rivet nuts are mainly used in non-structural load-bearing bolt connection, the connecting of interior parts such as rail buses, road buses, boats etc., the improved rivet nuts which can prevent spin are more excellent than the aircraft nuts, it has the lighter weight.